Mass Transfer Lab

Approx. Rs 2,50,000 / PieceGet Latest Price

Product BrochureProduct Details:

Evaporation deals with the concentration of a non- volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing a part of the solvent, useful product i.e. the concentrated solution or thick liquor is produced and the vapours are discarded. Long tube evaporators are usually used for the concentration of foamy liquids. The set-up is consists of two evaporators fitted in series. Each is made up of Stainless Steel tubes surrounded by a Stainless Steel jacket and fitted with accumulator. Dilute solution is feed to the first evaporator. Steam from a steam generator is to the first evaporator. Steam from a steam generator is supplied to evaporator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent produced in first evaporator are supplied to the second evaporator. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute is collected in the accumulator.

Approx. Rs 60,500 / PieceGet Latest Price

Product Details:

We are engaged in offering Absorption Drop Through Packed Bed product to our clients. Our range of this products is widely appreciated by our clients

Approx. Rs 2,50,000 / PieceGet Latest Price

Product BrochureProduct Details:

The Steam Turbine Test Rig is designed to study the performance, efficiency, and characteristics of a steam turbine under various operating conditions. The setup demonstrates energy conversion, steam expansion, shaft power generation, and basic principles of power plant operation. Steam generated in the boiler is superheated and supplied to the turbine. The turbine converts the thermal energy of steam into mechanical shaft power, which is absorbed by an electrical load or lamp bank. Various performance parameters such as inlet pressure, exhaust pressure, flow rate, temperature, and power output are measured.

Approx. Rs 30,000 / PieceGet Latest Price

Product BrochureProduct Details:

The Fluid Bed Dryer is designed to study the operation and performance characteristics of drying solid materials using hot air under fluidized conditions. The apparatus demonstrates the principles of fluidization, drying rate, heat transfer, and airflow control. Key Features • Acrylic/Glass drying chamber for clear visibility of fluidization. • Stainless steel air distributor with mesh support. • Digital temperature indicator with PID temperature controller. • Digital drying timer for preset drying duration. • Variable airflow control using a calibrated rotameter (LPM scale). • Separate switches for main, blower, and heater control. • Fine adjustable air flow valve for accurate fluidization. Working Principle Ambient air is passed through a heater and then forced upward into the drying chamber. When the air velocity exceeds the minimum fluidization velocity, the solid particles behave like a boiling fluid, increasing surface area and enhancing heat transfer. This results in fast and uniform drying of materials.

Approx. Rs 70,000 / PieceGet Latest Price

Product BrochureProduct Details:

The Packed Bed Reactor Apparatus is a laboratory-scale setup used to study chemical reactions and fluid flow through a packed bed of solid catalyst particles. It is widely used in chemical engineering education and research to analyze reaction kinetics, mass transfer, and pressure drop behavior in packed bed reactors.